|
Faculty of Engineering |
Department of Aerospace Engineering
Wackett Aerospace Centre
[ Australian Science at Work Entry ]
Postbuckling analysis of 3D composite structures
Alesi Mr H
Sponsor: CRC for Aerospace Structures
Status: Ongoing
Descriptor: Finite Element Modelling
Field of Research: 060407 Composite Materials
Non-linear rate dependent behaviour of graphite/epoxy structures
Alesi Mr H
Sponsor: CRC for Aerospace Structures
Status: Ongoing
Descriptor: Interlaminer Shear, Rate Dependencv
Field of Research: 060407 Composite Materials
Prediction of interlaminer failure in graphite/epoxy laminates
Alesi Mr H
Sponsor: CRC for Aerospace Structures
Status: Ongoing
Descriptor: Delamination, Interlaminer Stresses
Field of Research: 060407 Composite Materials
Impact damage of stiffened thin-skinned fibre composite structures
Scott Mr M
Sponsor: CRC for Aerospace Structures
Status: Ongoing
Descriptor: Impact, Damage Mechanisms
Field of Research: 060407 Composite Materials
Hail impact damage of stiffened fibre composite structures
Scott Mr M
Sponsor: CRC for Aerospace Structures
Status: Ongoing
Descriptor: Hailstone Impact, Damage Modelling
Field of Research: 060407 Composite materials
Durability of postbuckling fibre composite panels under shear
Scott Mr M
Sponsor: CRC for Aerospace Structures
Status: Ongoing
Descriptor: Durability, Environmental Conditions
Field of Research: 060407 Composite Materials
Damage tolerance of glass fibre reinforced plastics
Herszberg Assoc Prof I
Sponsor: Gliding Federation of Australia
Status: Ongoing
Descriptor: Fatigue, Bearing Loads, Load Transfer
Field of Research: 060407 Composite materials
Automated manufacture of textile composite structures
Herszberg Assoc Prof I
Sponsor: CRC for Aerospace Structures
In collaboration with: Rockwell/ASTA
Status: Ongoing
Descriptor: Textiles Processes
Field of Research: 060407 Composite Materials
Mechanical properties of composite braided preforms
Herszberg Assoc Prof I
Sponsor: CRC for Aerospace Structures
In collaboration with: Rockwell/ASTA
Status: Ongoing
Descriptor: Braiding, Damage Tolerance, Resin Infusion
Field of Research: 060407 Composite Materials
Production development of textile preforms
Herszberg Assoc Prof I
Sponsor: CRC for Aerospace Structures
In collaboration with: Rockwell/ASTA
Status: Ongoing
Descriptor: Multi-Filament Yarns, Preform
Architectures
Field of Research: 060407 Composite materials
Design and analysis of multi-layer woven composite preforms
Herszberg Assoc Prof I
Sponsor: CRC for Aerospace Structures
In collaboration with: Rockwell/ASTA
Status: Ongoing
Descriptor: Weaving Processes
Field of Research: 060407 Composite Materials
Design methodology for composite textile preforms
Herszberg Assoc Prof I
Sponsor: CRC for Aerospace Structures
In collaboration with: Rockwell/ASTA
Status: Ongoing
Descriptor: Fibre Placement, Textile Architectural Design
Field of Research: 060407 Composite materials
Mechanical behaviour of stitched composite textile preforms
Herszberg Assoc Prof I
Sponsor: CRC for Aerospace Structures
In collaboration with: RockweIVASTA
Status: Ongoing
Descriptor: Stitching, Resin 'Transfer Moulding, Buckling
Field of Research: 060407 Composite Materials
Hygrothermal effects on impact damage to woven and stitched T300/GY260 composites.
Herszberg Assoc Prof I
Sponsor: CRC for Aerospace Structures
In collaboration with: Rockwell/ASTA
Status: Ongoing
Descriptor: Damage Tolerance, Hygrothermal Environment
Field of Research: 060407 Composite materials
Cost analysis of composites manufacture in Australia
Herszberg Assoc Prof I
Sponsor: CRC for Aerospace Structures
In collaboration with: Rockwell/ASTA
Status: Ongoing
Descriptor: Costs Analysis, Manufacturing
Field of Research: 060407 Composite Materials
|
Department of Chemical and Metallurgical Engineering
[ Australian Science at Work Entry ]
Development of biodegradable polyvinyl alcohol copolymer-starch blends for packaging applications
Kosior E, Bhattacharya Prof S
Status: Completed 1995
Field of Research: 060406 Polymer and Textile Compounds
Blends of recycled polyethylene terephthalate and high density polyethylene
Bootanjai C
Status: Completed 1995
Field of Research: 060406 Polymer and Textile Compounds
Rheological behaviour of particulate rubberfilled low density polyethylene
Bhattacharya Prof S, Kosior E
Sponsor: GIRD Grant
Status: Ongoing
Field of Research: 060406 Polymer and Textile Compounds
Optimisation of the injection profiles for injection moulding machines
Bhattacharya Prof S, Churchward G
Status: Completed 1995
Field of Research: 060406 Polymer and Textile Compounds
Rheological characterisation and modelling of photographic coupler dispersions
Bhattacharya Prof S
Sponsor: Kodak Australasia
Status: Ongoing
Field of Research: 060599 Other Applied Sciences and Technologies n.e.c.
Melt filtration and rheological study of polypropylene bumper bars
Bhattacharya Prof S, Kosior E
Sponsor: CRC for Polymer Blends
Status: Ongoing
Field of Research: 060406 Polymer and Textile Compounds
Melt strength enhancement of polyolefines
Bhattacharya Prof S
Sponsor: CRC for Polymer Blends
Status: Ongoing
Field of Research: 060406 Polymer and Textile Compounds
Dynamic properties of filled polymer melt systems
Bhattacharya Prof S
Status: Ongoing
Field of Research: 060406 Polymer and Textile Compounds
Effect of temperature on the rheology of photographic dispersions
Bhattacharya Prof S
Sponsor: Kodak Australasia
Status: Ongoing
Field of Research: 060499 Other Material Sciences and Technologies n.e.c.
|
Department of Manufacturing Systems Engineering
[ Australian Science at Work Entry ]
Analysis of epoxy composites for rapid tooling in injection moulding process
Daver F, Nguyen L
Sponsor: Advanced Engineering Centre for
Manufacturing
Status: Ongoing
Field of Research: 060407 Composite Materials
Annular wrinkling of metal sheet blanks during the deep drawing process.
Mahdavian M, Zen X M (PhD)
Status: Ongoing
Field of Research: 060200 Manufacturing and Process Technologies
|
|
