|
Faculty of Applied Science |
Department of Applied Physics
[ Australian Science at Work Entry ]
Automatic determination of paper properties by infrared spectroscopy
Chief Researcher: Burt T
Supervisors: Wilksch Dr P A, Allen R
Sponsor: AMCOR Research & Technology Centre
Current Status: Completed November 1998
Descriptors: INFRARED SPECTROSCOPY, PAPER
Fields of Research: 020402 Optical and Opto-electrical Physics
029903 Instruments and Techniques
060299 Manufacturing and Process Technologies n.e.c.
Measurement of strain by electronic speckle pattern interferometry
Chief Researcher: Wilksch Dr P A
Current status: Ongoing
Descriptors: NON-DESTRUCTIVE TESTING; STRAIN MEASUREMENT; INTERFEREMOTERY; OPTICS
Fields of Research: 020402 Optical and Opto-electrical Physics
029903 Instruments and Techniques
|
|
Faculty of Engineering |
Department of Mechanical and Manufacturing Engineering
http://www.me.rmit.edu.au/research/research.htm
[ Australian Science at Work Entry ]
Robotic polishing of moulds for rapid tool manufacturing
Chief Researcher: Gan W C
Supervisor: Mahdavian Dr M
Sponsor: Advanced Engineering Centre for Manufacturing
Current status: Ongoing
Descriptors: ROBOTICS; POLISHING; MOULDS
Field of Research: 060299 Manufacturing and Process Technologies n.e.c.
Implementation of computer vision in flexible manufacturing
Chief Researcher: Kumar-Panwar D
Supervisor: Mahdavian Dr M
Current status: Concludes 1998
Descriptors: COMPUTER VISION; FLEXIBLE MANUFACTURING
Field of Research: 060299 Manufacturing and Process Technologies n.e.c.
Design and control of an air-jet compaction system for the automatic manufacturing of composite components
Chief Researcher: Ma L
Supervisors: John Dr S, Herszberg A/Prof I
Sponsor: CRC for Advanced Composite Structures
Current status: Concludes 1998
Descriptors: ROBOTICS; COMPOSITE MATERIALS
Field of Research: 060299 Manufacturing and Process Technologies n.e.c.
Fibre optic embeddability in composite structures
Chief Researcher: Hadzic R
Supervisors: John Dr S, Herszberg A/Prof I
Current status: Ongoing
Descriptors: OPTICAL FIBRES; COMPOSITE MATERIALS
Field of Research: 060299 Manufacturing and Process Technologies n.e.c.
Performance improvement of CNC EDMs
Chief Researcher: Chen Y
Supervisor: Mahdavian Dr M
Current status: Completed 1997
Descriptors: ELECTRIC DISCHARGE; CONTROL
Field of Research: 060299 Manufacturing and Process Technologies n.e.c.
|
|
